MC-62 Vintage

                             

MC-62 Vintage

 Microprocessor control panel with 6 hardwire zones. All zone can be configured as Normally Closed or Balanced Line with end line resistor.  LED indications for all functions.

Programmable entrance, exit time with buzzer indication. Regulation of Alarm trigger time based on European standards. C E approved 1.8 amp. 12V regulated battery charger. 

Alarm triggers:  Burglary, Fire and Tamper.  Full tamper protection in a Robust ABS Housing.  Easy to operate three position switch lock for arming in day and night mode.

VISION 8

VISION-8 Control Panel11 zone control panel of which 8 maybe programmed as: immediate, delay, day, night, normally closed or double balanced with separate trigger outputs for burglary and sabotage alarms. The other 3 zone are always armed and normally installed as Fire, Panic and Medical Distress. Microprocessor controlled. Built-in rugged ABS or Steel housing with tamper control of cover and wall removal. Alphanumerical 16 x 2 LCD display. Total of partial arming with electronic key on the front panel.

VISION 24

Control Panel Vision 24

27 zone control panel of which 24 maybe programmed as: immediate, delay, day, night, normally closed or double balanced with separate trigger outputs for burglary and sabotage alarms. The other 3 zone are always armed and normally installed as Fire, Panic and Medical Distress. Microprocessor controlled. Built-in rugged Steel housing with tamper control of cover and wall removal. Alphanumerical 16 x 2 LCD display. Total of partial arming with electronic key on the front panel.

IT-400 K

IT-400K Control PanelControl panel with 4 zones with by-pass, through built-in dip-switch the installer may choose to have these zones with end of line resistor or just normally closed.  Three zones are always active (panic, fire,& hold-up).  Arming and disarmingby means of a high security electronic key. The control panel is supplied with 2 keys.

Upon request the following receptaclesare available (SK-8B /SK-8M).

IT-400

IT-400 Control Panel

Control panel with 4 zones with by-pass, through built-in dip-switch the installer may choose to have these zones with end of line resistor or just normally closed.  Three zones are always active (panic, fire,& hold-up).  Arming and disarmingby means of a high security 3 position key switch: Key positions DAY– NIGHT - OFF.

We have 31 guests and no members online