IT-400 K

IT-400K Control PanelControl panel with 4 zones with by-pass, through built-in dip-switch the installer may choose to have these zones with end of line resistor or just normally closed.  Three zones are always active (panic, fire,& hold-up).  Arming and disarmingby means of a high security electronic key. The control panel is supplied with 2 keys.

Upon request the following receptaclesare available (SK-8B /SK-8M).

LED signals  for zone armed or by-passed. Alarm and memory LEDs.  Acoustic and Led signal for low battery. (Imax 5 A) relay output for indoor siren and (Imax 10 A) available for outdoor siren. 2 relay outputs for fire alarm and hold-up (Imax 1 A). Terminal output both acoustic and LED to signal unit status.

Characteristic:

  • Possibility to select the alarm time duration, (1, 2, or 3,minutes or continuous). 
  • Selection of entrance times (15, 30 ,60 seconds or  immediate) and the exit times (20 or 40 seconds).
  • Rechargeable battery compartment 12 V - 7,5 Ah max. 
  • SMD technology.
  • Robust  ABS housing.  
  • Dimensions: 275 x 220 x 80mm.
  • Weight: 1.3 Kg
Attachments:
Download this file (Istruzioni IT 400 eng.pdf)Instruction Manual IT-400 K Control Panel[English]292 Kb

We have 49 guests and no members online